Discussion:
Polaris rebuild
(too old to reply)
Bob & Starla
2009-10-30 20:57:05 UTC
Permalink
Does anyone have the torque specs for a Polaris/Fuji 488 Liquid cooled
machine (1999 Classic)?
David Courtney
2009-10-30 21:21:21 UTC
Permalink
Crankcase bolts: 8mm - 18 ft. lb.
10mm - 26 ft. lb
Cylinder base: 24 - 28 ft. lb
Head bolts: 18 - 19 ft. lb. (Make sure the nuts for
the shroud are on the right studs.)
Flywheel nut: 60 - 65 ft. lb.
There are two shroud bolts above the flywheel that get tightened after
the shroud is on.
Recoil hub 8 - 10 ft. lb
There are gaskets between the shroud and the engine on the intake side.
Post by Bob & Starla
Does anyone have the torque specs for a Polaris/Fuji 488 Liquid cooled
machine (1999 Classic)?
Continue reading on narkive:
Loading...